 |
|
The precision designed and developed range of level gauges offered by us are designed for use in all types of pressure vessels including tanks and boilers. Further these level gauges are assembled with pair of auto shut off ball check valve arrangement, that ensures in them maximum safety standards.
|
 
| | Tubular Level Gauge For observation at liquid level application at medium and low pressure | SPECIFICATIONS |
| | CC distance : | 250 to 1200 mm std 1201to | | | 2500 with Coupling and support | | Pressure rating : | 10 Kg/cm2 | | Temp. Rating : | 120°C | | Chamber MOC : | CS IS1875-II, A105, | | | SS304/316,Brass Brass, PVC, PP | | Glass Shields : | Guard rods, C frame, Angle, Pipe | | | shield | | End connection : | 112", 3/4", 1 " BSP, NPT or Flange | | | to ASA 150, 300, DIN, British or | | | any other International standard | | Accessories : | Drain/Vent, Cocks, Scales |
|
|
|
|
|
| | SPECIFICATIONS |
| | M500 Model | Screwed bonnet - upto 30 Kg/cm2- |
| Cost effective | | M600 Model | Bolted Bonnets - upto 200 kg/cm2 |
| MOC CS IS1875-II, A105, |
| SS304/316, Brass Brass,PVC,PP | | Q400 Model | Quick closing with or without chains | | P100 Model | Push type for marine applications | |
| | Reflex Level Gauge These are assembled with flat glasses with inner surfaces of reflecting prisms. Due to total internal reflection liquid level shows black in contrast to a mirror-like surface above. The gauges are used for services where observation is required at a distance and on low pressure boilers | CC distance | 250 to 2000 mm | | Pressure rating | 150 Rg/cm2(max.) | | Temp. Rating | 150 Deg C(max.) | | Chamber MOC | CS IS1875-II, A105, SS304, SS316, Brass , PP, PVC | | Accessories | Defrosting shield, Drain cocks,Scale | |
| | Transparent Level Gauge These are assembled with two numbers of totally transparent toughened glasses to give a thorough vision of liquid levels. These gauges are recommended for interface levels, coloured fluids where colour is of interest to the process behaviour and services where excessive foaming may exist. In high pressure boilers these gauges are recommended to be used with mica shields INSTALLATION: Telace gauges are made in standard lengths and hence are easily interchangeable during installation. Gauges are available from 572" section length to 120" section length. These gauges are available in a variety of connection combination to meet your installation requirements. Where long lengths above 60" are specified, special brackets welded to chamber can be supplied on request | Model No. | | A | | B | | | IN. | MM. | IN. | MM. | | 10 R or T | 14 | 356 | 12 ½ | 318 | | 20 R or T | 28 | 712 | 26 ½ | 674 | | 30 R or T | 42 | 1068 | 40 ½ | 1030 | | 40 R or T | 56 | 1424 | 54 ½ | 1386 | | 50 R or T | 70 | 1780 | 68 ½ | 1750 | | 01 R or T | 10 | 254 | 8 ½ | 216 | |
| | Auto Shut Off Cock
SPECIFICATIONS | | M500 Model | Screwed bonnet - upto 30 Kg/cm2- |
| Cost effective | | M600 Model | Bolted Bonnets - upto 200 kg/cm2 |
| MOC CS IS1875-II, A105, |
| SS304/316, Brass Brass,PVC,PP | | Q400 Model | Quick closing with or without chains | | P100 Model | Push type for marine applications | |
| | Gaskets & Mica | Gaskets | Compressed asbestos, Teflon, Neoperene - MOC Klinger Gaskets can also be supplied | | Sizes | 240X30, 240X34, 340X30, 340X34 | | Mica Shield | Transparent shields for stearm application | |
|
 |
|
 |
|
© Teleflo Instruments & Controls. All Rights Reserved (Terms of Use)